ZBX

CENTRAL BATTERY SYSTEMS (CBS) FOR OBJECTS OF ALL SIZES
ZBX-Anlagen

ZBX-S / ZBX-C / ZBX-M

    • Common operation of 20 luminaires as for maintained (M) or non maintained (NM) within one circuit – for luminaires with ADS module
    • Each connected luminaire can be configured independently (M/NM)
    • Area by area (groups) assignment for monitoring the critical circle
    • Single or combined switching of luminaires via switching inputs from the CBS
    • Individual luminaire monitoring via the supply line with the ADS or ADL module (no separate bus line necessary) in standard
    • Automatic function test
      • Automatic searching and adding of emergency lighting luminaires
      • Remote switch-off
      • Programming, monitoring and visualization of the entire system via software (optional)
      • iCCIF for monitoring the critical circuit
      • 4 potential-free relay outputs 24 V / 0.5 A for transmitting switching signals to the building management system
      • Integrated ZBX-LS-230 switch monitoring module with 8 inputs 230 V AC
      • Wire labelling on all internal lines


DIMENSIONS

ZBX Maße

ZBX-S

  • Degree of protection: IP21
  • Protection class: I
  • Colour: RAL7035 (light grey)
  • Dimensions: 2050 x 800 x 400 mm (HxWxD)
  • Optimum operating temperature: 0°C – 25°C*.
  • Nominal operating time: 1 h, 3 h or 8 h
  • Connected load: max. 5.5 kW DC
  • Prepared for: 60 final circuits

ZBX-C

  • Combination cabinet with battery compartment
  • Degree of protection: IP 21
  • Protection class: I
  • Colour: RAL7035 (light grey)
  • Dimensions: 2050 x 800 x 400 mm (HxWxD)
  • Optimum operating temperature: 0°C – 25°C *
  • Nominal operating time: 1 h, 3 h or 8 h
  • Connected load: max. 5.5 kW DC
  • Prepared for: 40 final circuits

ZBX-M

  • Combination cabinet with battery compartment
  • Degree of protection: IP 21
  • Protection class: I
  • Colour: RAL7035 (light grey)
  • Dimensions: 1200 x 600 x 350 mm (HxWxD)
  • Optimum operating temperature: 0°C – 25°C *
  • Nominal operating time: 1 h, 3 h or 8 h
  • Connected load: max. 1.8 kW DC
  • Prepared for: 16 final circuits


* strong deviations can lead to a reduced lifetime

WIRING DIAGRAM

MIX TECHNOLOGY VS. CONVENTIONAL INSTALLATION

ADVANTAGES OF THE MIX TECHNOLOGY

ADVANTAGES OF THE MIX TECHNOLOGY:

Operation of the luminaires in different operating modes (M, NM and switched) within one circuit

Further advantages:

  • shorter cable lengths
  • less circles necessary
  • lower installation effort
  • operating mode can be changed afterwards without rewiring

CONVENTIONAL INSTALLATION

A conventional installation differs from MiX technology in essential aspects:

  • only one operating mode per circuit possible
  • more circles necessary
  • higher installation effort
  • high costs for future changes


CENTRAL PROCESSING UNIT (CPU)

Notbeleuchtung MS-L

MS-L

  • 4 function keys
    – Block
    – Start function test
    – Start battery test
    – Resetting of deep discharge errors
  • 4 potential-free 24V inputs, freely programmable, for e.g: function test, battery test, sensor input etc.

  • 4 function keys for free programming
    – Switching on the circuits via AC
    – Switching on the circuits via DC
    – Resetting various alarms
    – Functional test without preheating phase
  • 3 x LON-BUS
  • 2 timers
  • Connection for iCCIF to monitor the critical circuit
  • Remote shutdown


CHARGING DEVICE L-980

Notbeleuchtung L-980_ZBX

FEATURES

  • Earth fault monitoring
  • Deep discharge protection
  • Battery symmetry monitoring
  • Fan contact
  • 3 connections for
    – Charge voltage monitoring
    – Charge current monitoring
    – Temperature monitoring

TECHNICAL SPECIFICATIONS

  • High charge: max. 265 V DC
  • Preset float charge: 245.1 V DC
  • Charging power: 980 W
  • Charging current: 4.5 A
  • Deep discharge protection: 183.6 V DC
  • Outputs: 4 programmable relay outputs 24V/0.5A

CONNECTIONS

  • Connection for passing on the charging status
  • 4 potential-free outputs, freely programmable
  • Passing on the battery state of charge
  • Quick access button


SWITCH MONITORING MODULE

Notbeleuchtung LS-230_ZBX

FEATURES

  • Monitoring of light switches
  • Programmable and reversible logic operations for the inputs
  • Option of monitoring individual general lighting circuits
  • Adjustable switch back time
  • Quick access button
  • Quick access button
  • LED status display for inputs

TECHNICAL SPECIFICATIONS

  • 8 potential-free inputs (230 V AC), switch-back time adjustable between 1 min and 1 h
  • Operational logic of the inputs can be reversed


LS-24

Notbeleuchtung LS-24

FEATURES

  • Monitoring of a 24 V DC closed-circuit current loop
  • Processing of switching commands from the building management system via potential-free inputs
  • Adjustable switch back time
  • Quick access button
  • LED status display for module status
  • LED status display for input status

TECHNICAL SPECIFICATIONS

  • 8 closed current loops 24V, switch-back time adjustable between 1 min and 1 h


POWER CIRCUIT MODULES

Notbeleuchtung ML-Module

MLS-4x3A

  • Number of circles: 4
  • Current per circuit: 3 A
  • Fuse protection: 5 AT / 250 V
  • MIX technology: Yes

MLS-2x4A

  • Number of circles: 2
  • Current per circuit: 4 A
  • Fuse protection: 6.3 AT / 250 V
  • MIX technology: Yes

MLS-1x6A

  • Number of circles: 1
  • Current per circuit: 6 A
  • Fuse protection: 10 AT / 250 V
  • MIX technology: No


BUS REMOTE CONTROL PANEL

Notbeleuchtung Bus-Fernmeldetableau FMS

ZBX-FMS

  • System status displayed in plain text
  • Optical status indication via LED and LCD
  • Acoustic warning in case of faults
  • BUS connection to the device via CAT 6 or higher
  • In compliance with DIN VDE 0100 part 718 – NHX cable not required

Insilia DPÜ

Notbeleuchtung INSiLIA-DPÜ
x-Phasen-Netzüberwachung

UNDERVOLTAGE MONITOR

  • With ICCIF loop monitoring
  • No NHX line necessary
  • Restores the condition according to DIN VDE 0100 part 718 section 718.563.8 in case of power failure

EXTERNAL SWITCH REQUEST MODULE

ELS-230V
ELS-230V-Anschluss

FEATURES

  • Switch monitoring of the general lighting
  • Phase monitoring function
  • Programmable and reversible circuit logic for input groups
  • Monitoring of individual fuses
  • Adjustable switch back time
  • Quick access button
  • LED status indication for module status
  • LED status indication for inputs

TECHNICAL SPECIFICATIONS

  • Supply voltage 24 V DC
  • Protection class: I
  • Degree of protection: IP21
  • Operating temperature -10°C to +40°C
  • 9 potential-free, separate inputs
  • 3 input groups with 3 inputs each
  • Phase monitoring function via input 7 – 9 (group 3)
  • Switch-back time adjustable between 1 min and 1 h
  • LON-BUS
  • BUS address range 1 – 30
  • Dimensions 105 x 85 x 60 (W x H x D)
  • 2.5 mm² connection terminals


BUS NETWORK GUARD

CZF-LON
CZF-LON-Anschluss

BENEFITS

  • No need to use an NHX cable
  • Tracing of the location in the event of a power failure for a faster location of the fault
  • Suitable for 1- or 3-phase operation
  • Outer conductor of different circles can be measured with a network monitor
  • Compact design, top-hat (DIN)Rail mounting
  • Individual circuits can be assigned to each CZF-LON – this enables the emergency lighting to be switched on in certain areas

Web-Interface

Main

Lader

Leuchtenmodul

ZBX-US

ZBX-Unterstationen

ZBX MODULE

  • Prepared for bus through-wiring
  • Prepared for bus through-wiring
  • Integrated resistor for bus termination
  • Easy installation of the expansion modules via control buttons
  • Control LED for quick status control of the expansion modules

DETAIL PICTURES

Notbeleuchtung Zenntralbatteriesysteme Detail_ZBX

Downloads